Mikster DLM-080 Manual do Utilizador descarregar pdf (Página 14)

The DLM-080 FUTURE Digital Recorder – User’s Manual

26.11.2004

4.5 CONTROLLER RELAY OUTPUTS

As a standard the DLM-080 uses the algorithm of on-off controller with hysteresis. The

hysteresis value must be specified in the F14-F29 (SETUP) functions. Depending on

parameter setting in functions F30-F37 it is possible to define controller relay state as NR

(normally open, algorithm 1) or NZ (normally closed, algorithm 2).

Press the

key (for proper channel) in order to ensure that control for a given

channel is carried out according to setting of the set value – the diode is on. In case if a

diode built-in in the key (for proper channel) is off, then the control channel is

blocked and controller relay is open.

Zał

Wył

ALGORITHM 1

Wz – set value

Hg – “upper” hysteresis (F30-F45, SETUP)

Hd – “lower” hysteresis (F30-F45, SETUP)

Zał

Wył

ALGORITHM 2

Wz – set value

Hg – “upper” hysteresis (F14-F29, SETUP)

Hd – “lower” hysteresis (F14-F29, SETUP)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 47 48

Sem comentários

Mikster DLM-080 Manual do Utilizador Página 14