Mikster DLM-080 Manual do Utilizador descarregar pdf (Página 12)

The DLM-080 FUTURE Digital Recorder – User’s Manual

26.11.2004

f) an hour-meter (range from 0 to 999)

g) multivibrator (second or minute or hour base)

4.1 THE PT-100 MEASUREMENT CHANNEL

In case if a measurement channel is defined as PT-100, readout values will be displayed in

a dynamic way, that is:

• within range from -99.9 to -10.0 with accuracy of 1 °C

• within range from -9.9 to +99.9 with accuracy of 0.1 °C

• within range from +100.0 to +399.9 with accuracy of 1 °C

4.2 THE 0..20 (4..20) mA MEASUREMENT CHANNEL

In case if a measurement channel is defined as 0..20 (4..20) mA, readout values will be

displayed according to the value of the F54-F61(SETUP) function.

that is:

• if F54-F61 = 3, then display range is 0.00 to 9.99 (0..20 mA)

• if F54-F61 = 4 , then display range is 00.0 to 99.9 (0..20 mA)

• if F54-F61 = 5 , then display range is 000 to 999 (0..20 mA)

• if F54-F61 = 6 , then display range is 0.00 to 9.99 (4..20 mA)

• if F54-F61 = 7 , then display range is 00.0 to 99.9 (4..20 mA)

• if F54-F61 = 8 , then display range is 000 to 999 (4..20 mA)

4.3 CHANNEL AS TIME-METER

In case if a measurement channel is defined as time-meter, then method of time metering

will be defined in the F38-F40 (SETUP) functions, that is:

• if F54-F61 = 11

, then second-meter

• if F54-F61 = 12

, then minute-meter

• if F54-F61 = 13

, then hour-meter

Moreover, it is necessary to define in the F62-F69 functions the method for time-meter

release, that is:

• F62-F69 = 0 time-meter reset, and it is released “manually” after pressing and

holding the

key (for proper channel) for approximately 2[s].

• F62-F69 = 1

then, if Tini contact closed, time-meter counts down until reaching

the set value, if time-meter reaches the set value and Tini contact opens, then the

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 47 48

Sem comentários

Mikster DLM-080 Manual do Utilizador Página 12